Underfloor Mixing Station
Actuator installed on a thermostatic mixing valve in a floor-heating manifold cabinet.
Home › Floor Heating Systems & Parts › Thermostatic Mixing Valve Actuator
4-Wire Thermostatic Mixing Valve Thermal Actuator 230V — NO / NC for Underfloor Heating Manifolds
Thermostatic Mixing Valve
Designed for compatible hydronic floor-heating mixing valves and manifold temperature-control assemblies.
4-Wire Control
Use the exact 4-wire terminal assignment supplied for the selected actuator and controller combination.
230V / 24V
The listing identifies a 230V/24V supply and a 230V/24V acceptable voltage range. Confirm the exact production version before installation.
Product Overview
The TELIN 4-wire thermostatic mixing valve thermal actuator is intended for compatible hydronic underfloor-heating systems. It operates on a thermostatic mixing valve to support temperature regulation in floor-heating manifolds and related residential heating assemblies.
The listing identifies 230V/24V voltage, ±10% acceptable voltage, PVC material, water resistance, a 5A relay and NO/NC terminology. These values describe the listed product configuration; confirm the exact terminal assignment, switching behavior, valve interface and technical drawing before installation.
4-Wire230VNO / NC5A RelayHydronicMixing Valve
Installation note: This page is product marketing content, not a wiring diagram. Disconnect power and use the supplier’s exact 4-wire diagram for the selected NO/NC version and valve assembly.
Key Features
Mixing Valve Actuation
Controls a compatible thermostatic mixing valve in a hydronic floor-heating circuit.
Floor Heating Manifolds
Suitable for representative manifold cabinet and mixing-station applications.
Residential HVAC
Product page applications include apartment, home office, living room, bedroom and dining areas.
Protected Cable Routing
Use a complete protected cable route into an enclosed control box; do not leave conductors exposed.
PVC Housing
Listed PVC material supports a lightweight compact actuator enclosure.
Water-Resistant Feature
Water resistance is listed; confirm the actual IP rating for the project environment.
Application Scenes
These representative visuals show the actuator installed on a mixing valve in a floor-heating system. They are marketing scenes and do not replace engineering drawings.
Boiler Mixing Circuit
A compact hydronic mixing circuit with protected cable routing and supply/return pipes.
Residential Floor Heating
Mixing valve temperature regulation for a modern home floor-heating system.
Need the Correct Mixing Valve Version?
Request the exact 4-wire wiring diagram, NO/NC selection, 230V specification, valve interface and commissioning data.
